3-Sided Exterior Kennel Doors

The 3-Sided Exterior Kennel Dog Doors by Security Boss® have been designed especially for commercial and residential kennels. Often kennels will have a wall penetration that meets with the flooring. Many times guillotine kennel doors are installed on the interior side of the wall to control the direct access of dog out into their runs. This setup allows for an incredible protection against loss of heat in the winter and air-conditioning in the summer.

The 3-Sided Exterior Kennel Doors are designed to be installed on the exterior side of the wall, allowing for full use of the interior mounted guillotine doors. When used together, you have controlled access along with unparalleled energy savings.

Use of the 3-Sided kennel doors with guillotine doors

Wall penetrations can vary greatly from facility to facility. Therefore our doors are custom made to the required dimensions.

Note: Doors are non-refundable as they are built to your requirements.

The 3-Sided Exterior Kennel Door is made with a heavy-duty extruded aluminum, and has double reinforced mitered corners for structural strength. The flap is UV protected and weatherized to prevent shrinking in sub-zero temperatures. Each flap has 1 1/2" long Alnico #5 magnets that create a positive seal. Both sides of the flap are also lined with heavy density brush weatherstripping to prevent any drafts. The flap length is 3/16" shorter than the sides of the door to minimize any scraping or wear due to movement on the kennel floor.

Security Boss® Kennel Door return policy: 3-Sided Exterior Kennel Doors are made to fit the customers dimension requirements, therefore they are non-refundable. Flaps are made from flexible vinyl so if they are chewed or destroyed by an occupant, you may want to charge the owner for replacement value.