MaxSeal Custom Made Pet Doors - Doors / Walls

"The Best Pet Doors by Design"

  Custom doors generally are made for two different reasons: to fit an existing opening in a door or a wall, or to certain   size specifications, such as the opening being a certain size for a unique situation (Giant breeds, dogs with mobility issues etc.).

Weatherized Flaps:
Flaps are impact tested in conditions of  -20 degrees Fahrenheit. Moore Pet has tested these doors in the harsh Minnesota winters and summers, we highly recommend this door.


Important Note:  When having a door made to a rough cut opening in a wall; it is recommended that your hole in the wall is a minimum of 1/8' larger than the rough cut dimension chosen for the custom door.

Example 1: If the hole you are installing a pet door is 15" wide x 20" high, then you multiply 15x20=300 square inches.  Look in the chart below to see what range 300 falls into for pricing.  Important: your flap size will be 13"w x 18"h (there is a difference of 2" in width and height from rough-cut dimension to flap size).

Example 2: If you want a flap size of 15"wide x 20"high, then you would figure the rough-cut to be 17"w x 22" (minus 2" from each measurement because of the 2" difference between rough-cut and flap size).  17 x 22=374 square inches.  Find 374 in the chart below for pricing.

Pricing for these custom doors is based on Rough Cut Dimensions
(width x height of your opening = Total sq. inches in chart below)

MaxSeal Custom Made Door Helpful Information
Security Boss Manufacturing LLC is dedicated to providing products that operate beyond expectations and provide the customer with long years of satisfaction. Our products are designed so that you can maintain your pet door indefinitely.
Rain Guard Video	Click to View Frame Colors	Print Instructions Custom Door Custom Wall	Video Install Door Model Wall Model	Technical Specs Door Model Wall Model	Insulating Info
Custom Flap Information	Replacements & Accessories		Common Questions	Adobe Reader Req. to view PDF files	Wall Install Examples Vinyl & Alum. Stucco Brick Exterior

MaxSeal Custom Made Pet Doors Made in USA
Custom pet doors can be made to fit an existing cut through a door or wall as well as to a certain flap size. Note: The flap size will always be approx. 2" less in width and height than the rough cut "hole" dimension. See calculator above for exact measurements
Pricing is determined by the size of the cut through the wall or door; width x height = Pricing Range
Rough Cut Dimensions Square Inch Range (For pricing) Multiply width x height)	Single Flap Door Mount	Dual Flap Door Mount	Single Flap Wall Mount	Dual Flap Wall Mount
0-69"	$115.00	$140.00	$145.00	$170.00
69-93"	$140.00	$170.00	$175.00	$205.00
93-141"	$175.00	$210.00	$215.00	$250.00
141-175"	$210.00	$250.00	$255.00	$295.00
175-215"	$235.00	$280.00	$285.00	$330.00
215-257"	$275.00	$325.00	$330.00	$380.00
257-309	$310.00	$365.00	$360.00	$415.00
309-350"	$340.00	$400.00	$400.00	$460.00
350-372"	$360.00	$430.00	$435.00	$495.00
372-527"	$390.00	$465.00	$455.00	$530.00
527-600"	$450.00	$525.00	$515.00	$590.00
For Custom Doors that are larger than what can be ordered on the above chart, please call us at 1-800-829-7876 for assistance. Custom Made doors are non-refundable as they are made specifically to your dimensions.  Return Policy. Custom Doors require 4-5 days for fabrication then ships via UPS. Note: Custom doors with Rough Cut Dimensions LARGER than 17.75"w x 33.75" h, require a 10 day fabrication period. The Minimum Rough Cut Dimension that theses doors can be made to is 5.5" in width or height.
A specification / data sheet will be included with your order. This will show all your measurements for the custom door so that you will be able to order replacement flaps in the future.  Moore Pet will also keep this information on file.