Electronic Patio Pet Door

Video

Electronic
Door
Product
Manual

How to
Adjust
Fitting

Assembly
Pictorial

Accessory
Patio Locks
Available on
Product Order Page
Below

Hassle Free
Returns
Click Below

Get
Adobe
Reader

Product
Video

Manual

This unit uses the Ideal Patio Insert frame along with the Animate Electronic Pet Door. 
Unit arrives to customer in 2 packages...simple installation required, screw driver required.

Flap Size
(W x H)

Regular

77 3/4" to
80 1/4"

Regular Custom

80 1/4" to
93 3/4"

Shorty

75" to
77 1/2"

Shorty
Custom

77 1/2" to
78 3/4"

Tall

93 3/4" to
96 1/8"

Tall
Custom

96 1/8" &
Taller

The pet used in this insert is white - You can choose the patio frame color.

7"w x 7 1/4"h

$250

Technical Specifications
Electro-magnetic refers to an electrically assisted magnetic locking device. 
This results in more reliable and consistent activation of the pet door by the pets collar tag.

This unit uses the Ideal Patio Insert frame along with the Animate Electronic Pet Door. 
Unit arrives to customer in 2 packages...simple installation required, screw driver required.

Custom Extension Example
The custom sizes use a custom extension piece that mounts on top of the patio insert to reach the height
of your patio opening allowing for a 3" range of expansion.

The top spring-loaded adjusting section of the Patio Pet Door appears as an "H" piece when viewed from the side. The overall width of this piece is 13/16" (Will fit into most any sliding glass door track).

The spring-loaded adjustment provides for a 2.5" range for proper fitting into your opening. Most top tracks in sliding glass doors do not have any center rails, however, if you do have this feature then the Insert can straddle any rail at the top 5/8" wide or narrower.

The spring-loaded top is secured with 2 thumbscrew locks, accessible from the interior only, so that someone from the exterior of the house would not be able to compress or remove the unit.

The bottom section of the Patio Pet Door has an overall width of 5/8". A semi-circle, "C" channel is centered and runs the length of the bottom. This "C" channel is design to straddle the center rail in the channel on the floor that your sliding glass door follows.

By straddling this center rail, the  Patio Pet Door will remain centered to the frame of your sliding door when closed to this unit.

Note: If the center rail in the channel on the floor is wider than 5/16", then this patio Insert will not be able to straddle it and as a result may not fit properly in your opening

These Patio Inserts are a stock items and ship within 24 hours (business days),
custom models require 1-3 business days to fabricate. All units ship via UPS.

Measuring for the Patio Pet Door:

To determine which height range will work with your slider, open the slider and measure from the very bottom inside track to the very top inside track. As you look down on the groove that the slider follows on the floor, you may see a thin rail. You will want to measure down past that rail, from the deepest part of the channel on the floor to the very top inside channel above.

Will These Patio Pet doors fit all Sliding Doors?

As you look at the track on the floor your slider follows; you most often will see a "rail". If this "rail" is narrower than 5/8" (as you look down on it), then the patio insert should fit your slider.
(We cannot guarantee fits as manufacturers are constantly coming out with new designs, but call us if you have any questions at 1-800-829-7876).

What is the Rise?:

This is the distance that the bottom of the pet opening is positioned off of the ground and the distance that the pet will have to step over to use the pet door.

Draft Stopper / Weather stripping:

The draftstopper is a wide vinyl weather stripping section that attaches to the back side of your sliding door. When an insert is installed, your sliding door breaks the seal between the slider and fixed panel. This weather stripping will seal out any drafts.

Adjustable Height Range:

The top section of the patio insert floats on two tension rods that compress or expand to obtain the best possible fit in the patio door frame. The top is fit into the upper patio slider track and the bottom rests on the bottom slider track. Once in place, there are two thumb bolts that lock the top section into place to prevent the patio insert from being removed from the outside.

How does my Sliding Door Lock?

Each patio insert comes with a locking pin mechanism to use if you choose. We strongly suggest bracing the door with a stick or an adjustable brace bar; as this immobilizes your slider and is the most effective way to secure your sliding door.

Different ways to Install the Patio Pet Door:

The patio insert can be mounted on the stationary side of the patio door. Many patio doors have stoppers that normally prevent the stationary panel from moving. If these stoppers can be removed, the stationary panel can be moved to accommodate the patio panel.
Note: This technique will not work on patio doors where the stationary panel is molded into the frame.

Extensions for "Custom" Ranges:

Ideal makes 3 different height ranges of patio pet doors: Regular, Shorty & Tall. For customers who have a slider height that falls between these 3 ranges, we have custom extensions made so that we can fit any height from 75" to 106" tall. These extensions slide in at the top of the insert. Some customers use a couple of screws to stabilize the extension piece. (See picture in chart below for custom extension piece)

Weather Seal Foam Bumper:

Each patio insert comes with a foam bumper so your slider will gently rest against the Patio Pet door. This foam bumper will also help to seal out drafts and bugs.

Usually Ships in 3-5 Business Days

Warranty & Return Info