Gun Dog House Door - Easy Dog Door

Step #1: Measure the belly height of your pet from ground level to his underside to find correct height of the door opening. Cut opening 12” wide x 17” high. Allow at least a 1 ½” flat outside mounting surface.

Step #2: Place Door over opening and use the enclosed four, 1” wood screws to hold door to dog house.

Step #3: Show your dog how to use the door. Your dog will learn to use your pet door almost at once, but there are a few which may show a bit more nervousness at first.

Tips:
• The most important rule is to be patient
• Do not let the dog have a bad experience with the door or it may become frightened.
• Most dogs can be trained to use a pet door in a matter of hours. Your dog will respond to encouragement, repetition, and play in particular.
• If you have children, get one of your youngsters to stand on one side of the door, calling and encouraging your dog to join his buddy.
• Alternatively, use the door flap as part of a game – throw a ball through, for instance. As your dog responds to your encouraging calls, help it through the door, patting and congratulating it. Repeat the game several times, continually encouraging the animal with positive gestures and comments. Within a short time your dog will be totally familiar with its pet door and use it happily on its own.


Installation instructions for the optional closing panel.
1.Construct a 2" wide frame on inside mounting surface.
2.Place channel angle one inch from dog door cut opening.
3.Install one-inch tabs at the base of each channel.
4.Slide heavy-duty closure into channel. Remove as needed.