Ideal DraftStopper Patio Pet Doors

Single Pane Glass Insert with an Insulated Pet Flap

The DraftStopper Patio Doors are designed for customers who want a better sealing pet opening that what is offered by a single flexible flap. This Patio insert uses the Ideal UltraFlex pet door, which is an insulated segmented flap. This flap, made from GE Lexan, is nearly indestructible. It has a heavy duty gasket that lines all sides of the flap and seals very well. The pet door  includes an "Animal Lock-out" slide in panel. The Patio Insert itself is has an aluminum frame that holds single pane safety glass. The very top of the patio insert is spring-loaded to allow easy installation and removal without the use of any tools. A pin lock mechanism is included so that you can lock your slider into place.

The UltraFlex segmented flap is made of tough GE Lexan,
they are nearly indestructible.  The DraftStopper Patio Pet Door flap may be too heavy
for cats and very small dogs.

Note: your slider will not lock into the patio insert). Many customers will use an optional Charley-bar or brace bar behind the slider.

The DraftStopper is recommended for those customers who want a better insulated patio door
without the higher cost of a dual pane glass unit.

Video	Install	How to Adjust Fitting	Guide to Replace Flaps	Need Flaps?	Accessory Patio Locks Available on Product Order Page Below	Hassle Free Returns Click Below	Get Adobe Reader
Product Video	Install Instructions	Click Here To View	Click To View	Replace Flaps			Adobe Reader Required to view PDF files

Ideal DraftStopper Patio Insert Single Pane Glass Insert with an Insulated Pet Door
The Frame of the DraftStopper Patio Insert is 5/8" in thickness which makes it fit most every brand of sliding glass doors.  Notes: You will be able to choose your "Rise Option" and Choice of "Frame Color" on the More-Info pages.  range of expansion. The custom sizes use a custom extension piece that mounts on top of the patio insert to reach the height of your patio opening allowing for approx 2.5" adjustment
Pet Door Used in Unit	Pet Opening (wxh)	Rise Options	Overall Panel Width	Regular 77 3/4" to 80 1/4"	Regular Custom 80 1/4 " to 93 3/4"	Tall 93 3/4" to 96 1/8"	Tall Custom 96 1/8 " & Taller
Flap is made of segmented panels that are hollow for insulating value. Locking Security Panel is included	Medium 6 5/8" x 11 1/4"	standard-4"	12 3/8"	$200	$260	$275	$320
	Extra Large 10 1/4" x 15 3/4"	standard-8" optional- 4"	15 7/8"	$220	$280	$300	$345
Panels Usually Ship in 24 Business Hours
View of Top Section                                      Spec Info				View of Bottom Section                 Spec Info
The top spring-loaded adjusting section of the Ideal DraftStopper Patio Pet Door appears as an "H" piece when viewed from the side.  The overall width of this piece is 13/16" (Will fit into most any sliding glass door track). The spring-loaded adjustment provides for a 2 1/2" range for proper fitting into your opening.  Most top tracks in sliding glass doors do not have any center rails, however, if you do have this feature then the Ideal DraftStopper Patio Pet Door can straddle any rail at the top 5/8" wide or narrower. The spring-loaded top is secured with 2 thumbscrew locks, accessible from inside the house only, so that someone from the exterior of the house would not be able to compress or remove the unit.				The bottom section of the Ideal DraftStopper Patio Pet Door has an overall width of 5/8".  A semi-circle, "C" channel is centered and runs the length of the bottom.  This "C" channel is design to straddle the center rail in the channel on the floor that your sliding glass door follows. By straddling this center rail, the DraftStopper Patio Insert will remain centered to the frame of your sliding door when closed to this unit. Note:  If the center rail in the channel on the floor is wider than 5/16", then this patio Insert will not be able to straddle it and as a result may not fit properly in your opening.
Limited Lifetime warranty.