|
Ideal DraftStopper Patio Pet Door - Medium Pet Opening
"Tall" adjustment height: 93 3/4" to 96 1/8"
Pet Opening: 6 5/8"w x 11 1/4"h
Overall Panel width: 11 9/16"
(Slide-in locking cover included)
The Ideal DraftStopper Patio Pet Door is a single pane glass unit that has an insulated pet door. It is recommended for those customers who wish to have a better insulated pet door but without having the added cost of a dual pane glass insert.
The DraftStopper is also much lighter than dual pane units, allowing you to easily set-in and remove the patio pet door with ease. This becomes important for customers who may need the full opening of their slider from time to time. As a rule, patio inserts take away from your usable space when they are installed. The Draftstopper since it is a temporary or permanent install type, can easily be set off to the side at any time without the hassle of hardware and re-installation.
Ideal DraftStopper Patio Door Tall - Medium
"Tall" Height Range 93 3/4" to 96 1/8"
Panel Width - 11 9/16"
Slide-In locking Panel Included
|
Pet
Opening |
Rise Options
|
Video |
Install |
Hassle Free
Returns
Click Below |
Get
Adobe
Reader |
6 5/8" wide
x
11 1/4" tall
|
4"
Rise selected
will raise the
pet opening
by that amount
|
|
|
|
Adobe Reader Required
to view PDF files |
Notes: If your Sliding door opening height measurement is very close to minimum of this inserts range then you may want to consider a shorter height range range to ensure this unit will contract enough to fit into your track. Call us with any questions 1-800-829-7876 .
How to measure for a Patio Pet DoorNo Re-stocking fees for this Product
|
Pet Opening 6 5/8" wide x 11 1/4" tall: The Pet door used in this insert is the Ideal UltraFlex Door. It is made of segmented sections of tough / durable polycarbonate plastic. This door is designed to last without replacement due to normal use. The DraftStopper Patio Pet Door comes with a Limited Lifetime Warranty through the manufacturer (Ideal Pet Products).
Adjustable height range 93 3/4" to 96 1/8": the top section floats on two tension rods. You
simply compress the top and fit it in the track, then release the top. A
thumb bolt on either side near the top secures the top section so the
Patio Pet Door cannot be removed from the outside. It installs and is
removed in seconds.
No tools required to install the patio insert.
Security: Slide-in locking panel is included to keep pets in or out for your convenience. Each Patio Pet Door comes with a dead bolt pin to use if you choose. We
strongly suggest chocking the door with a stick as this immobilizes your
slider.
Step Over Rise for Pet: The Rise is the portion the pet steps over to pass through the pet door. The Medium pet opening comes standard with a 4" rise. The top of the pet opening will be 15 1/4" off the floor. Ideally your pet's shoulders should be shorter than this height.
Installation: This Patio Pet Door can be mounted on the fixed side of the slider. Some fixed windows are molded in and for those, this will not work. Others, have stoppers either in the bottom or top track that keep the fixed side stationary. If you remove the stoppers, you can pull out the fixed side far enough to accept the patio insert.
Comes with a slide in panel to lock off pet opening. Includes weather stripping that seals out bugs and drafts, and a foam bumper to seal your sliding door to the patio insert. Also see the PDF Instructions above. Note: Permanent installation hardware not included. Nearly all customers use this item as a temporary type installation.
|
