General Pet Products

Reference Info

(Your shopping cart is empty)

You are here: Home > PET DOOR MANUFACTURERS > Ideal Pet Products > Lockable CF Patio Insert

Ideal Lockable Cat Flap Patio Insert

The Ideal Lockable Cat Flap Patio Pet door is available in 3 different standard height ranges. Custom sizes are also available (custom extensions modify the standard heights) so this patio insert will work with nearly any size patio sliding door. The glass is 1/8" thick safety glass, and the aluminum frame is 5/8" thick.

These inserts are designed to be installed and removed with ease. They can be permanently screwed into your opening, however, most customer will set them into the slider track only, that way they can be set off to the side if you need your entire slider opening for any reason.

A locking-pin mechanism is included to lock your slider in place when next to the insert.Moore Pet recommends that you use an adjustable brace bar or even a stick behind the sliding door, this method of immobilizing the patio sliding door makes it nearly impossible for anyone to enter from the outside.

[Photo] How to Measure for a Patio Pet Door

[photo] Pet Door used for the Ideal Lockable Patio Cat Door

4-Way Locking Control Settings of pet door:

Open Both Ways
Closed from both directions
Closed going outside - Open coming indoors
Open going outside - Closed coming indoors

Pet Opening: 6 1/4" w x 6 1/4"h

Lockable Cat Flap Patio Insert for Glass Sliding Doors
The custom sizes use a custom extension piece that mounts on top of the patio insert to reach the height of your patio opening allowing for a 3" range of expansion. Select below the height range that corresponds with your Slider opening height
Pet Door Used in Unit	Regular 77 3/4" to 80 1/4"	Regular Custom 80 1/4" to 93 3/4"	Shorty 75" to 77 1/2"	Shorty Custom 77 1/2 " to 78 3/4"	Tall 93 3/4" to 96 1/8"	Tall Custom 96 1/8" and taller
Pet Opening: 6 1/4 x 6 1/4 4-Way Locking	$130	$151	$193	$202	$195	$245
Panel Color Choices: White - Bronze - Satin (Aluminum)
View of Top Section Spec Info			View of Bottom Section Spec Info
The top spring-loaded adjusting section of the Ideal LCF Patio Doors appears as an "H" piece when viewed from the side. The overall width of this piece is 13/16" (Will fit into most any sliding glass door track). The spring-loaded adjustment provides for a 2 1/2" range for proper fitting into your opening. Most top tracks in sliding glass doors do not have any center rails, however, if you do have this feature then the Ideal LCF Patio Door can straddle any rail at the top 5/8" wide or narrower. The spring-loaded top is secured with 2 thumbscrew locks, accessible from inside the house only, someone from the exterior of the house would not be able to compress or remove the unit.			The bottom section of the Ideal LCF Patio Door has an overall width of 5/8". A semi-circle, "C" channel is centered and runs the length of the bottom. This "C" channel is design to straddle the center rail in the channel on the floor that your sliding glass door follows. By straddling this center rail, the Ideal LCF Patio Pet Door will remain centered to the frame of your sliding door when closed to this unit. Note: If the center rail in the channel on the floor is wider than 5/16", then this patio Insert will not be able to straddle it and as a result may not fit properly in your opening
Features 4-way locking Cat Flap: Pet opening measures 6 1/4 x 6 1/4" Rise Portion the pet steps over to pass through the pet door. You can choose the rise that fits your pet most comfortably. Draft Stopper Weather stripping that seals out bugs and drafts. Height Range The top section floats on two tension rods. You simply compress the top and fit it in the track, then release the top. A thumb bolt on either side near the top secures the top section so the Patio Pet Door cannot be removed from the outside. It installs and is removed in seconds. Foam bumper So your slider will gently rest against the Patio Pet door. Locking your Slider Each Patio Pet Door comes with a spring loaded dead boltto use if you choose. We strongly suggest chocking the door with a stick as this immobilizes your slider. Installation This Patio Pet Door can be mounted on the fixed side of the slider. Some fixed windows are molded in and for those, this will not work. Others, have stoppers either in the bottom or top track that keep the fixed side stationary. If you remove the stoppers, you can pull out the fixed side far enough to accept the patio insert.
Panels ship in 24 business hours via UPS Warranty & Return Info

[photo] Ideal Locakble Cat Flap Patio Pet Door

Moore Pet Supplies
3170 Airport Road
La Crosse WI 54603

CSS HTML