Ideal VIP Vinyl Insulated Panel Hefty Cat

Patio Pet Door

(The Only Vinyl Patio Insert on the Market)
Dual Pane  Low-E Glass Insert

Ideal VIP Hefty Cat is a dual pane glass insert that uses the Ideal Hefty Cat Flap.

Ideal Pet Products has developed the VIP Patio Insert for customers with vinyl sliding doors.  This energy efficient vinyl frame  is made with particular attention to detail in style and performance.  The insert has double paned "Low-E" glass and the very popular Hefty Cat 4-way locking cat flap. 

4-Way Locking Control Settings:
Open Both Ways
Closed from both directions
Closed going outside - Open coming indoors
Open going outside - Closed coming indoors

This generous flap (7 1/2"w x 10 3/4"h) is not only great for the larger cat
but works perfectly for small dogs and toy breeds.

The overall frame of these units is made with vinyl and is thicker than any other patio pet door on the market...giving you a closer match when your sliding door meets with the unit.  Another great improvement is the ability to lock your sliding door directly to the VIP Patio Insert!  (Fits most   existing locks).  All other patio inserts use auxiliary locking systems to secure the sliding door.

These inserts come in variety of height ranges for nearly every size of sliding door.  The VIP is designed to be installed "semi-permanently".  The latches for fastening the unit into place are hidden from view, so you do not have any visible screws or holes to detract from the aesthetics of your sliding doors.
The VIP is most certainly a higher-end patio insert, requiring slightly more involvement with installing than traditional patio inserts.

Install directions.

Ideal VIP Hefty Cat Patio Insert for Vinyl Sliding Doors
The Frame of the VIP Insert will fit slider frames 1 1/2" - 1 3/4" thick.  Will Fit Left or Right Handed doors.  Limited Lifetime warranty. Free Shipping  -Limited Time Only Select below  the height range that corresponds with your Slider opening height
Pet Door Used in Unit	Rise Options (step over height)	Overall Panel width	Standard 76 3/4 - 78 1/2"	Standard-Plus 79 3/4 - 81 1/2"	Tall 84 3/4 - 86 1/2"	Tall-Plus 92 3/4 - 94 1/2"
Pet Opening: 7 3/4 x 10 3/4"	standard-4" optional- 2" & 6"	12 3/8"	$325	$325	$325	$398
Units do not have a locking panel, pet opening has a "locked" setting VIP Panels usually ship in 24 business hours
View of Top Section                               Spec Info				View of Bottom Section                     Spec Info
The Ideal VIP Hefty Cat (Vinyl Insulated Panel) is designed to be permanently secured into your sliding glass door opening.  The unit is secured at the top with two cover plates (Interior & Exterior) that are screwed to the top section as a finishing touch. These panels do not have any adjustment mechanisms such as spring loaded tops like other models. The VIP Panel will fit into top channels that are 1 1/2" wide or more.  If your channel is narrower than 1 1/2", then this panel will not fit correctly in your opening.				The bottom section of the VIP is designed to straddle the center guide rail that is most often found in the channel on the floor.  (This is the groove that the your sliding door follows). The VIP will fit center guide rails that are 3/4" wide or less.  The VIP will fit 99% of the tracks out on the market, but you will want to make sure that the center guide rail is not wider than 3/4". The overall thickness of the VIP unit is 1 1/2" in width.  These will closely match the thickness of the frame on your sliding door.  The VIP is equipped with hardware allowing you to LOCK your slider to the VIP, (99% of the time).  Otherwise a brace-bar is recommend.
Warranty & Return Info