null
Questions? Call Us
1-800-829-7876
Compare Selected 0
Show Sidebar Navigation

Ideal VIP Patio Insert

There are no products listed under this category.

[photo] Authorized Ideal Pet Products Retailer

Ideal VIP Vinyl Insulated Panel Patio Pet Door

Dual Pane | Low-E Glass | Insulated Pet Flap | Permanent Install Type

VIP Large Pet OpeningVinyl Insulated patio Pet DoorVIP Medium Pet Opening

Ideal VIP (Vinyl Insulated Panel) is a dual pane glass insert that uses the Ideal UltraFlex Pet door.

Ideal Pet Products has developed the VIP Patio Insert for customers with vinyl sliding doors. This energy efficient vinyl frame is made with particular attention to detail in style and performance. The insert has double paned "Low-E" glass and a newly designed durable, insulated UltraFlex flap. This flap is made of durable GE Lexan segments that allow for any pet to use, while giving you a superior pet opening seal. The durable flap is "chew-proof" and has a reputation of never having to be replaced. A slide in locking panel is also included to secure the pet opening.

[image] Close up views of the VIP pet door

[photo] How to Measure for a patio Pet Door
The overall frame of these units is made with vinyl and is thicker than any other patio pet door on the market...giving you a closer match when your sliding door meets with the unit. Another great improvement is the ability to lock your sliding door directly to the VIP Patio Insert! (Fits most existing locks). All other patio inserts use auxiliary locking systems to secure the sliding door.

These inserts come in variety of height ranges for nearly every size of sliding door. The VIP is designed to be installed "semi-permanently". The latches for fastening the unit into place are hidden from view, so you do not have any visible screws or holes to detract from the aesthetics of your sliding doors.
The VIP is most certainly a higher-end patio insert, requiring slightly more involvement with installing than traditional patio inserts.

Note: Currently there are no alternative or 'Custom Rise' options on the VIP Panels. Ideal Pet Products may offer these in the future.

Note: There is a 20% restocking fee for all VIP returns


Video
Installation
Need
Flaps?
Guide to
Replace Flaps
Get
Adobe Reader

Ideal VIP Patio Insert
for Vinyl Sliding Doors




The Frame of the VIP Insert will fit slider frames 1 1/2" - 1 3/4" thick.
Fits Left or Right Handed doors.

Pet Door
Used in Unit

Pet Opening
(wxh)

Rise
Options
Overall Panel
Width
Standard


76 3/4
to
78 1/2"
Standard
Plus


79 3/4
to
81 1/2"
Tall Standard

92 3/4
to
94 1/2"
Tall
Plus


95 3/4
to
97 1/2"

[photo] Door used in the Ideal VIP Patio Insert

Flap is made of segmented panels that are hollow for insulating value.

Locking Security Panel is included

Medium

6 5/8 x 11 1/4"

standard-4"

12 3/8

$338.80


$379.15


$407.00


$447.35

Extra Large

10 1/4 x 15 3/4"

standard-6"

15 7/8"
$407.00


$447.35


$500.50


$540.85


Please make sure the pet opening and choice of rise will accommodate your pet(s).

Panels Usually ship Within 24 Business Hours


Standard Heights Adjustment Detail
Click Below to View Sequence

Plus Heights Adjustment Detail
Click Below to View Sequence
Standard Heights Adjustment Detail
Plus Heights Adjustment Detail

View of Top Section - Spec Info



View of Bottom Section
- Spec Info

[photo] Top section of the Ideal VIP Patio Insert - Standard Heights
[photo] Top section of the Ideal VIP Patio Insert - Standard Plus Heights
[photo] VIP Patio Panel - bottom section view

The bottom section of the VIP is designed to straddle the center guide rail that is most often found in the channel on the floor. (This is the groove that the your sliding door follows).

The VIP will fit center guide rails that are 3/4" wide or less. The VIP will fit 99% of the tracks out on the market, but you will want to make sure that the center guide rail is not wider than 3/4".

The overall thickness of the VIP unit is 1 1/2" in width. These will closely match the thickness of the frame on your sliding door. The VIP is equipped with hardware allowing you to LOCK your slider to the VIP, (99% of the time). Otherwise a brace-bar is recommend.