Security Bolt Lock with Key
'Ultimate Patio Pet Door Lock'
The
Security Bolt Lock with Keyed Access is offered with every Ideal Pet Flexible Flap Patio Insert at no charge. These high performance locks provide the very best option for locking your sliding glass door into place when a patio pet door is installed. Mounted on the back edge of your slider, these locks immobilize your sliding door so that it is impossible to gain entry when in the locked position. The Security Bolt Lock comes with two keys ensuring that only you have control of the lock. The retracting pin releases when the latch is opened and extends when compressed.
The Security Bolt Lock can be used on the Inside or the Outside of your home
Note: Complete hardware and instructions for installation are included
Patio Pet Door Security Keyed Bolt Lock
Installation Instructions
INSTALLATION: Close and lock patio door. Unlock lock with key and pull bottom section of housing down and away from lock body. This will retract the side bolt and expose two screw holes. (These screws are concealed when unit is locked.) Locate lock to top back edge of inside sliding door (or top front face of outside slider;
use caution in determining exact location as drill or screw contact with glass will cause breakage) and position as close to upper track flange as possible, without actually making contact. Mark all three screw hole locations and drill through one metal surface using a 1/8" drill bit. Secure the top screw only and be sure that lock body is vertical to the door. Lift the lower housing until slide bolt makes contact with upper track. Mark and drill with a 3/8" drill bit.
NOTE: It will be necessary to drill deep enough to allow full extension of the slide bolt in order to secure the lock. Be sure that the hole is large enough to eliminate any binding of the slide bolt. Install and secure all (3) screws.
;){kind=icon}
Now Shipping to 34 countries!
