![[photo] pet1 product logo](/v/vspfiles/assets/images/pet_1_product_logo_100.jpg) Pet 1 Product Patio Pet DoorsPatio Doors with Dual Pane Glass - Automatic Height Adjustment - Adjustable Rise
Dual Pane Glass with Double Layered flexible flap
The Pet 1 Product Patio Pet Door is the most innovative patio pet door to hit the market in years. It has been designed from the bottom up to eliminate the weaknesses of current patio inserts.
These new design features allow the customer to use the insert under more conditions than ever before:
Varying Rise Options The Small and Medium sized openings have 6 variations of rises you can use. The Large has 4 variations. Change the rise of your opening as your pet ages or if you acquire additional pets!
Gas Shock System for Height Adjustment Patent Pending system that allows for an 8-inch extension range and is easy to install and remove from your opening.
Ultra Swing Dual Flexi-Flap Patent Pending flap design that uses two-layers of flexible vinyl (Flap is one assembly) and rotates a full 360 degrees which means there is less flap stress and longer flap life. Ultra Swing flap closes by a magnetic seal. Security Locking Panel is also included.
Optional Interchangeable Pet Openings One of the best features of the Pet 1 Patio pet door is the ability to change your opening to any size (Purchase of new pet opening is required). This gives you the ability to change the opening without having to purchase an entire new panel.
Adjustable Security Bar Included Locks your slider into position when the patio insert is installed (Slider does not lock into the insert).
Check out the videos below for more information and detail
The Pet 1 Product Patio Pet Door works with vinyl, aluminum and wood sliding doors. It can be used either on the left or the right side of your opening. We also include a Charley-bar (brace bar) so that you can lock your sliding door in place next to the patio insert (Your slider will not lock into the patio pet door). The white painted finish is a powder-coated application which means it is applied under intense heat. This results in a stronger, longer lasting finish than traditional spray paint methods.
Installation Instructions(Adobe Reader Required)

Note: As with any patio pet door when used with sliders that have an external sided slider (Pella), you will not be able to use the security bar, but can use an after market lock pin to secure your slider in place when next to the insert.
The Pet1 Product Patio Pet door is considered to be one of the best quality patio inserts available.
|
Pet 1 Product Patio Pet Door Dual Paned Glass - Automatic Adjusting - Adjustable Rise |
Frames Available in White Only
Panels ship in 1-3 business days
|
|
Pet Opening (wxh) |
Rise Options Included
|
Overall
Panel Width |
Panel Thickness |
Standard
76" - 84" |
Tall
92" -100" |
|
7" x 10" |
Includes Panels for Rises of: 2.5", 4.5", 6.5", 8.5", 10.5" & 12.5"
|
18"
|
1 1/2"
|
Special Pricing$359 |
Special Pricing
$399.00
 |
|
9" x 15"
|
Includes Panels for Rises of: 2.5", 4.5", 6.5", 8.5", 10.5" & 12.5"
|
18" |
1 1/2" |
Special Pricing $359 |
Special Pricing
$399.00
 |
|
11 1/2" x 20" |
Includes Panels for Rises of: 2.5",4.5", 6.5" & 8.5"
|
18" |
1 1/2" |
$389 |
Special Pricing
$399.00
 |
|
Optional Pet Openings |
-Extra pet openings so that you will have the ability to change the opening in your current Pet1 Patio Pet Door.
-If you want an additional flap for your current model, choose the same size pet opening as your current model. |
$65.00 |
![[photo] Pet1 Product Patio Pet Door Flap Close Up](http://www.petdoorpros.com/moorepet/image/icons/pet1-flap.jpg)
The Pet 1 Patio Pet door flap consists of two soft vinyl flaps that are embedded in a wide magnetic base. This wide magnetic strip along the bottom keeps flaps closed in windy environments, and the dual flap spacing provides for the best insulating door flap that is available in Patio Pet Doors.
|
View of Top Section |
View of Bottom Section |
The Pet1 Patio Insert top section seats into the top channel of your slider. Rubber coated to protect even vinyl doors. This
top section is the only part of the patio insert that fits into the top
channel...main body of the insert does not insert in the channel. |
![[photo] Bottom section of the Pet1 Patio Insert](http://www.petdoorpros.com/moorepet/image/icons/pet1-bottom.jpg) The Pet1 bottom section has 2 rubber protected feet that will seat
into the channel on the floor. The main body of the patio insert will
not fit into the channel. The bottom feet will straddle the
center rail most often found in the channel on the floor. The Pet1
will straddle any center rail 3/8" or less. If your channel
on the floor does not have a center rail, then the Pet1 will still work
for you as the tension of the unit in the opening will keep it secure
and in place. |
![[photo] How to Measure for a Patio Pet Door](http://www.petdoorpros.com/moorepet/image/icons/measure-ppd.jpg) Note regarding Shipping: These units are substantial. The shipping cost we charge the customer is not the full shipping cost.Returns require an R.M.A within 5 days of receipt of your order. All returns subject to a 20% mandatory restocking fee. We cannot waive this fee. |
|
|
|