Home > DOORS > WALL MOUNTED >

Custom MaxSeal Wall Mount
Custom MaxSeal Wall Mount Pet Door

Order to Size or Replace Existing Older Door
Choose Single or Dual Flap version
Dual Flap provides a near perfect weather barrier



 
Alternative Views:


The Glass Guru

Pricing starts at: $200.00
Complete pricing chart at bottom of this page

Availability:: Usually Ships in 2 to 3 Business Days
Product Code: SB-CUSTOM-MAX-WM


Square Inch Range*:


Rough Cut (W x H)*:


Flap Version*:


Tunnel Length*:

Click to view another Frame Colors

Frame Colors*:

Click to view another Security Panel Colors

Security Panel Colors*:


Int. Security Panel Load*:


Qty:  
Description Installation Instructions
 

MaxSeal Custom Made Pet Doors - For Walls

The Best Pet Doors by Design

High Performance Insulated Pet Doors
Security Boss Manufacturing LLC Custom doors generally are made for two different reasons: to fit an existing opening in a wall, or to certain size specifications, such as the opening being a certain size for a unique situation (Giant breeds, dogs with mobility issues etc.).

Best Sealing - Best Insulating - Most Secure

Flaps are impact tested in conditions of -20 degrees Fahrenheit. Moore Pet has tested these doors in the harsh Minnesota winters and summers, we highly recommend this door.


Important Note: When having a door made to a rough cut opening in a wall; it is recommended that your hole in the wall is a minimum of 1/8' larger than the rough cut dimension chosen for the custom door.


Security Boss Custom Doors for WallsSecurity Boss Custom Doors to Nearly Any DimensionSecurity Boss Custom Doors

Example 1: If the hole you are installing a pet door is 15" wide x 20" high, then you multiply 15x20=300 square inches. Look in the chart below to see what range 300 falls into for pricing. Important: your flap size will be 13"w x 18"h (there is a difference of 2" in width and height from rough-cut dimension to flap size).

Example 2: If you want a flap size of 15"wide x 20"high, then you would figure the rough-cut to be 17"w x 22" (minus 2" from each measurement because of the 2" difference between rough-cut and flap size). 17 x 22=374 square inches. Find 374 in the chart below for pricing.

Custom Door Calculator

Pricing for these custom doors is based on Rough Cut Dimensions
(width x height of your opening = Total sq. inches in chart below)


MaxSeal Custom Made Doors
Helpful Information

Security Boss Manufacturing LLC is dedicated to providing products that operate beyond expectations and provide the customer with long years of satisfaction. Our products are designed so that you can maintain your pet door indefinitely.
Print Instructions
Printable Installation Instructions
Custom Wall
Technical Specs
Click links below for Technical Information on models
Wall Model
Wall Install
Examples

Vinyl & Alum.
Stucco
Brick Exterior

MaxSeal
Custom Made Pet Doors

 USA


Custom pet doors can be made to fit an existing cut through a wall or
or to a certain flap size.

Note: The flap size will always be approx. 2" less in width and height than the rough cut "hole" dimension.
See calculator above for exact measurements

Pricing is determined by the size of the cut through the wall or door;
width x height = Pricing Range
Selecting a 16" Tunnel will add a $15 or $30 charge to prices below in chart

 
Rough Cut Dimensions
Square Inch Range
(For pricing)
Multiply
width x height)
Single Flap
Wall Mount
Dual Flap
Wall Mount
0-69"
$200.00
$240.00
 
69-93"
$245.00
$280.00
 
93-141"
$295.00
$330.00
 
141-175"
$325.00
$375.00
 
175-215"
$375.00
$425.00
 
215-257"
$405.00
$455.00
 
257-309
$450.00
$510.00
 
309-350"
$510.00
$560.00
 
350-372"
$565.00
$630.00
 
372-527"
$610.00
$700.00
 
527-600"
$650.00
$725.00
6-Year Warranty
We also offer doors that are LARGER than shown on the above chart; please call us at 1-800-829-7876 for assistance.

Important Notice: Custom Made doors are built to the customer's specifications.
They are non-refundable & non-returnable.
These doors ARE covered under the manufacturer's warranty.

Custom Doors require 3-5 days for fabrication then ships via UPS.
If you need a door in a specific time frame, please call us.


Note: Custom doors with Rough Cut Dimensions LARGER than 17.75"w x 33.75" h,
require a 10 day fabrication period.

The Minimum Rough Cut Dimension that these doors can be made to is 5.5" in width or height.

Note: Black Security Panels are fabricated so that the interior is black and the exterior side is white. This is done so that the Security Panel will reflect sunlight and heat rather than absorb the sunlight.

A specification / data sheet will be kept on file for reference with Moore Pet Supplies LLC & Security Boss Manufacturing LLC for any future replacement parts that may need to be ordered.

 USA



We suggest that when pre-cutting the rough for any pet door, that you add at least an 1/8" to the width and height to allow for easy fitting. Some Rough cuts are more precise and may fit tighter if the hole is not completely true.We always recommend that the door is on hand prior to cutting. We will not be responsible for re-fitting after the fact.

See the MaxSeal Pet Doors in Action!

Often Purchased Together:

Adjustable Pet Platform Right Handed Tin Snips Security Boss Secure Locking Pin - MaxSeal Basic Pet Door Install Kit for Walls

Add
Our Price: $8.00

Add
Our Price: $17.00

Add
Our Price: $29.99

Add
Adjustable Height Pet Platform Right Handed Tin Snips Security Boss Secure Locking Pin - MaxSeal Basic Pet Door Install Kit for Walls
Security Boss High Wind Neo Magnets Deluxe Pet Door Install Kit for Walls Left Handed Tin Snips Security Boss Magnets
Our Price: $5.00

Add
Our Price: $49.99

Add
Our Price: $8.00

Add
Our Price: $8.00

Add
Security Boss High Wind Neo Magnets Deluxe Pet Door Install Kit for Walls Left Handed Tin Snips Security Boss Magnets
Security Boss Protective Rain Guard Security Boss Replacement Thumbscrews Security Boss Replacement Rivets Security Boss Replacement Pile Weatherstripping
Our Price: $20.00

Add
Our Price: $5.00

Add
Our Price: $5.00

Add
Our Price: $5.00

Add
Security Boss Protective Rain Guard Security Boss Replacement Thumbscrews Security Boss Replacement Rivets Security Boss Replacement Pile Weatherstripping

Average Customer Review: 5 of 5 Total Reviews: 1 Write a review.

  1 of 1 people found the following review helpful:
 
Dual Flap for Cats July 28, 2017
Reviewer: Marilyn from Placerville, CA United States  
I bought this dual flap through the wall door for my cats.  I wanted them to have in/out access and at the same time, keep the outside weather from coming inside the house.  I installed it myself without any problems and am very happy with the outcome.  The cats, though, had difficulty in learning to use it because of the two flaps and the magnets making a tight seal.  Learning took a while and I had to prop the flaps up for a period of time, gradually lowering them as the cats got used to it.  I ended up taking the magnets out, which lifted out of their tracks with a pliers.  The cats did not like pushing so hard against the flaps in order to "break" the magnet.  Now since they both use it readily without any difficulty, I will gradually start adding the magnets back.   I am very happy with the door and the function.  Just beware if you get for cats, it may take some patience.  Perhaps a one flap door would have been easier for them.  Or maybe I need smarter cats!

Was this review helpful to you?


Browse for more products in the same category as this item:

DOORS > WALL MOUNTED
DOORS > INSULATED PET DOORS
DOORS > LARGE BREED DOG DOORS
DOORS > CUSTOM MADE
Security Boss MFG