Pride Pet Door
Pride Pet Door

Two-Piece Flap Design - Black Rubber
These door do not self frame an opening
Particle Board closing panel - 4 Sizes

Alternative Views:

Pride Pet Door Authorized Retailer

Pricing starts at: $59.00
Complete pricing chart at bottom of this page

Availability:: Usually Ships in 24 Hours
Product Code: PRIDEPD

Choose Pet Door Size


Pride Pet Doors

Two-Piece Heavy Vinyl Black Flap

Fits all door thicknesses.
Frames mount to surface of door.
Not self framing.

This Pride Pet Door is constructed of heavy duty aluminum and includes a white top loading security panel that is constructed of particle board. The security panel is coated with a bright white paint and locks into place with a locking lever attached to the interior frame. The flap is constructed from a durable black rubber material and is a 2 piece design. The inner flap seals against the outer U shaped flap with magnets, and the outer U shape flap seals against the pet door frame with magnets creating a good weather seal. This Pride pet door can be installed into screen doors with the Pride Screen Door Adapter frame. Due to the method of installing each frame individually the thickness is unlimited to what this door can be mounted.

***Read Installation Note Below

Pride Pet Door

Pet Opening
Rough Cut
Overall Frame Dimension
4 3/4"w x 7"h
7 5/8" x 9 5/8"
9 1/8" x 10 1/2"
8 1/2"w x 12 1/2"h
11 1/8" x 14 7/8"
12 5/8" x 15 3/4"
11 1/2"w x 17"h
14" x 18 7/8"
15 1/2" x 19 3/4"
14 1/2"w x 19 1/2"h
17 1/4" x 21 3/4"
18 3/4" x 22 3/4"

For mounting into screens see the Pride Screen Adapter

***Installation Note:
Before installing this door be sure to finish the opening to prevent weather damage. For solid doors smooth the opening surface and apply a waterproof sealant. For hollow core doors use wood shims to fill the gap from the inside and outside door skins then apply a waterproof sealant around the rough cut opening. Install the frame with rubber assembly on the exterior side of the door and secure loosely with wood screws. Insert the thin interior frame in the same manner. Before tightening screws ensure the pet door is square on both sides. When the pet door is square tighten the screws.
  • Heavy duty aluminum frame
  • White top load security panel
  • 2 piece rubber flap design
  • Installs into any door or wall thickness
  • 4 pet opening sizes

Often Purchased Together:

Pride Pet Door Screen Adaptor

Pride Pet Door Screen Adaptor

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item: