The SureFlap Microchip Large Pet Door
is the latest RFID microchip pet door offered by SureFlap, with additional features
and benefits over the original SureFlap Microchip Cat Flap
. The SureFlap
Microchip Large Pet Door offers a larger pet opening measuring 7" wide by 6.69" high. This pet
opening is recommended for large cats and small dogs. This SureFlap Pet Door
allows embedded microchips along with collar tags to access the door.
(Additional Collar tags can be purchased separately
one tag is included with each door
The SureFlap Microchip Large Pet Door is compatible with all microchip formats worldwide and features a new double locking mechanism for increased security against other animals. This pet door can program
up to 32 pet identities with either collar tags or microchips. One collar tag
is included in the purchase.
The SureFlap Microchip Large Pet Door features a new "Curfew Mode" allowing
control over when the door is locked and unlocked. This Microchip pet door allows
any pet inside the house access out, but requires the embedded microchip
or collar tag to have access back in through the door from the outside. The
installation process for the SureFlap Large Pet Door is very simple, and can be installed
into doors up to 2 3/4" thick, and walls (2" tunnel liners are available
to fit any wall thickness
). The SureFlap Microchip Large Pet Door has a 3 year
To Purchase Collar Tags Separately Click
To Purchase Tunnel Extensions Separately Click
To Purchase Mounting Adapter Separately Click
not attempt to implant the RFID microchip in your cat on your own. Contact your
local veterinarian to ensure a safe and successful implant..
Optional Tunnel Extensions can be added for Installation into walls:
*Learn Mode - To start operation, this SureFlap pet door needs
to learn the unique RFID codes of your pets microchip or collar
tag. This process is only required once for each pet as these
codes are permanently stored, even if the batteries are removed.
In order to program the door, follow these simply instructions
1. Remove the button cover and press the learn button for approximately
1 second and release.
2.The locks will open, allowing the pet to pass through. The icon
above learn mode will flash on the LCD screen.
3. The next pet to pass through the flap from either direction,
will have the RFID microchip or tags code saved.
4. Once the pet's microchip code is stored, the door will revert
to normal operation (LCD stops flashing).
*For multiple pets, repeat the process until
all microchip numbers are stored.