PetSafe Wall Entry Dual Flap Pet Doors Pet Door with Adjusting tunnel for walls(For Walls 4 3/4" to 7 1/4" thick)
The PetSafe Wall Entry Pet Door is designed for walls 4 3/4" to 7 1/4" in thickness. The pet door has a flap on the very exterior and interior side, creating an insulating air-space. The interior and exterior frame are attached to a plastic (black) tunnel sleeve. These two tunnel sleeves glide over each other to adjust for your wall thickness. No trimming is necessary for installation.
The flaps in this door are identical to the PetSafe Classic flaps for replacement purposes. The plastic slide in security panel can be inserted on the interior or the exterior side of the pet door.
(Note: When installing this door, it is necessary to affix screws/mollies from the frame into your wall. The holes need for these screws are extremely close to the rough cut hole you will have in the wall. Therefore, we do not recommend this door for installation through stucco, brick or adobe walls. For these types of install please see the MaxSeal™ Wall Mount Pet Doors.) Ships same day if ordered before 2:00pm CST
(Valid on Business days only)
PetSafe
Wall Entry Dual Flap
Dual Flap Pet Doors
|
Self Adjusting Tunnel
Fits walls 4 3/4" to " 7 1/4 " thick
|
Size |
Flap Size |
Rough-Cut (wxh) |
External Frame
Dimension (wxh) |
Price |
|
5 x 7" |
6 7/16"w x 10 1/8"h |
9 1/2"w x 13 1/4"h |
|
|
8 x 11" |
9 5/8"w x 14 3/8"h |
12 7/16"w x 17 3/8"h |
|
|
10 x 15" |
11 7/16"w x 18 1/16"h |
14 7/16"w x 21"h |
|
The is constructed by mounting a PetSafe Classic from to 2 tunnel sleeves that glide over each other to adjust for wall thickness. The security closing panel can be inserted on the interior or exterior of the pet door. |
Replacement Flaps
Warranty & Return Info
|
|
